Access To Control Terminals; Control Terminals (Fc 301) - Danfoss FC 300 Design Manual

FC 300 Design Guide

Access to Control Terminals

"
All terminals to the control cables are located
underneath the terminal cover on the front of the
adjustable frequency drive. Remove the terminal
cover by means of a screwdriver (see illustration).

Control Terminals (FC 301)

"
Drawing reference numbers:
8-pole plug, digital I/O.
1.
3-pole plug, RS485 bus.
2.
3. 6-pole, analog I/O.
USB Connection.
4.
Control Terminals (FC 302)
Drawing reference numbers:
10-pole plug, digital I/O.
1.
3-pole plug, RS485 bus.
2.
6-pole, analog I/O.
3.
USB Connection.
4.
How to Install
A1, A2 and A3 enclosures
A5, B1 and B2 enclosures
MG.33.B6.22 - VLT is a registered Danfoss trademark
105