Changing A Group Of Numeric Data Values; Infinitely Variable Change Of Numeric Data Value - Danfoss FC 300 Design Manual

FC 300 Design Guide

Changing a Group of Numeric Data Values

"
If the chosen parameter represents a numeric
data value, change the chosen data value by
means of the <> navigation keys as well as the
up/down navigation keys. Use the <> navigation
keys to move the cursor horizontally.
Use the up/down navigation keys to change the data
value. The up key increases the data value, and the
down key decreases the data value. Place the cursor
on the value you want to save and press [OK].
Infinitely Variable Change of Numeric
"
Data Value
If the chosen parameter represents a numeric
data value, select a digit by means of the
<> navigation keys.
Change the selected digit infinitely variably by
means of the up/down navigation keys.
The chosen digit is indicated by the cursor. Place the
cursor on the digit you want to save and press [OK].
144
How to Program
MG.33.B6.22 - VLT is a registered Danfoss trademark