Parameter Lists - Danfoss FC 300 Design Manual

FC 300 Design Guide

Parameter lists

"
Changes during operation
"TRUE" means that the parameter can be changed while the adjustable frequency drive is in operation
and "FALSE" means that the it must be stopped before a change can be made.
4-Set-up
"All set-up": the parameter can be set individually in each of the four set-ups, i. e. one
single parameter can have four different data values.
"1 set-up": data value will be the same in all set-ups.
Conversion index
This number refers to a conversion figure used when writing or reading by
means of an adjustable frequency drive.
Conv. index 100 67
Conv. factor 1 1/60
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 Boolean variables
54 Time difference w/o date
default setting ( ) display text
*
254
How to Program
6 5 4 3
1000000 100000 10000 1000
[ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark
2 1 0 -1 -2
100 10 1 0.1 0.01
-3 -4 -5 -6
0.001 0.0001 0.00001 0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD