Danfoss FC 300 Design Manual page 293

FC 300 Design Guide
*
Bit 8
31
Byte 1 2
Byte 2 2 23
Byte 3 2 15
Byte 4 2 7
Name (index 6):
The Name returns a string value in ASCII format, containing the name of the parameter.
Example:
In this example, the master reads the name of par. 0-01, Language.
The following telegram must be sent to the adjustable frequency drive:
STX LGE
02 0E
STX = 02 Start byte
LGE = 0E Length of remaining telegram
ADR = Sends the adjustable frequency drive on Address 1, Danfoss format
PKE = 4001; 4 in the PKE field indicates a Read Parameter Description and 01 indicates par. 0-01,
Language
IND = 0006; 6 indicates that Names is required.
The response from the adjustable fre-
quency drive will be:
STX LGE
02 12
PKE = 3001; 3 are the response for Name and 01 indicates the par. 0-01, Language
IND = 00 06; 06 indicates that Name is sent.
PVA = 4C 41 4E 47 55 41 47 45
L A N G U A G E
The parameter value channel is now set up to a visible string which returns an ASCII
character for each letter in the parameter name.
Lower limit (index 7):
The Lower limit returns the minimum allowed value of a parameter. The data type of
Lower limit is the same as for the parameter itself.
* default setting ( ) display text
How to Program
7 6
30 29
2 2
2 22 2 21
2 14 2 13
2 6 2 5
ADR PKE IND
01 40 01 00 06
ADR PKE IND
01 30 01 00 06
[ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark
5 4 3
28 27 26
2 2 2
2 20 2 19 2 18
2 12 2 11 2 10
2 4 2 3 2 2
PWE PWE
HIGH LOW
00 00 00 00
PVA
4C41 4E47 5541 4745
2 1
25 24
2 2 ms
2 17 2 16
2 9 2 8
2 1 2 0
PCD1 PCD2 BCC
XX XX XX XX XX
PCD1 PCD2 BCC
XXXX XXXX XX
293