Danfoss FC 300 Design Manual page 259

FC 300 Design Guide
4-** Limits / Warnings
"
Par. Parameter description
No. #
4-1* Motor limits
4-10 Motor speed direction
4-11 Motor speed low limit [RPM]
4-13 Motor speed high limit [RPM]
4-16 Torque limit motor mode
4-17 Torque limit generator mode
4-18 Current limit
4-19 Max output frequency
4-5* Adj. warnings
4-50 Warning current low
4-51 Warning current high
4-52 Warning speed low
4-53 Warning speed high
4-58 Missing motor phase function
4-6* Speed bypass
4-60 Bypass speed from [RPM]
4-62 Bypass speed to [RPM]
* default setting ( )
How to Program
display text [ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark
Default value 4-set-up
[2] Both directions All set-ups
0 RPM All set-ups
3600 RPM All set-ups
160.0 % All set-ups
160.0 % All set-ups
160.0 % All set-ups
132.0 Hz All set-ups
0.00 A All set-ups
Par. 16-37 All set-ups
0 RPM All set-ups
Par. 4-13 All set-ups
[0] Off All set-ups
0 RPM All set-ups
0 RPM All set-ups
Change Conver- Type
during sion index
operation
FALSE - Uint8
TRUE 67 Uint16
TRUE 67 Uint16
TRUE -1 Uint16
TRUE -1 Uint16
TRUE -1 Uint16
FALSE -1 Uint16
TRUE -2 Uint16
TRUE -2 Uint16
TRUE 67 Uint16
TRUE 67 Uint16
FALSE - Uint8
TRUE 67 Uint16
TRUE 67 Uint16
259