Parameters: Operation And Display - Danfoss FC 300 Design Manual

FC 300 Design Guide
Parameters: Operation
"
and Display
0-0* Operation / Display
"
Parameters related to the fundamental functions of
the adjustable frequency drive, function of the LCP
buttons and configuration of the LCP display.
0-0* Basic Settings
"
Parameter group for basic frequency
converter settings.
0-01 Language
Option:
*
English UK (ENGLISH)
German (DEUTSCH)
French (FRANCAIS)
Danish (DANSK)
Spanish (ESPANOL)
Italian (ITALIANO)
Chinese (CHINESE)
Finnish (FINNISH)
English US (ENGLISH US)
Greek (GREEK)
Portuguese (PORTUGUESE)
Slovenian (SLOVENIAN)
Korean (KOREAN)
Japanese (JAPANESE)
Turkish (TURKISH)
Traditional Chinese
Bulgarian
Serbian
Romanian (ROMANIAN)
Hungarian (HUNGARIAN)
Czech
Polish (POLISH)
Russian
Thai
Bahasa Indonesian (BAHASA
INDONESIAN)
Function:
Defines the language to be used in display.
The adjustable frequency drive can be delivered
with 4 various language packages. English and
German are included in all packages. English
cannot be erased or manipulated.
Language package 1 consists of:
* default setting ( )
How to Program
[0]
[1]
[2]
[3]
[4]
[5]
[10]
[20]
[22]
[27]
[28]
[36]
[39]
[40]
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
display text [ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark
English, German, French, Danish, Spanish,
Italian and Finnish.
Language package 2 consists of:
English, German, Chinese, Korean, Japanese,
Thai and Bahasa Indonesian.
Language package 3 consists of:
English, German, Slovenian, Bulgarian, Serbian,
Romanian, Hungarian, Czech and Russian.
Language package 4 consists of:
English, German, Spanish, English US, Greek,
Brazilian Portuguese, Turkish and Polish.
0-02 Motor Speed Unit
Option:
*
RPM
Hz
Function:
Select display of motor speed parameters (i.e.
references, feedbacks and limits) in terms of
shaft speed (RPM) or output frequency to the
motor (Hz). This parameter cannot be adjusted
while the motor is running.
0-03 Regional Settings
Option:
*
International
US
Function:
Select International [0] to set par.1-20 Motor Power
units to kW and the default value of par. 1-23Motor
Frequency to 50 Hz. Select US [1] to set par.1-21
Motor Power units to HP and the default value of
par. 1-23 Motor Frequency to 60 Hz. This parameter
cannot be adjusted while the motor is running.
0-04 Operating State at Power-up (Hand)
Option:
Resume
*
Forced stop, use saved reference
Forced stop, reference = 0
Function:
Select theoperating mode upon reconnection of the
frequency converter to mains voltage after power
down in Hand (local) operation mode.
[0]
[1]
[0]
[1]
[0]
[1]
[2]
151