How To Order; Drive Configurator - Danfoss FC 300 Design Manual

FC 300 Design Guide

How to Order

Drive Configurator

"
It is possible to design an FC 300 adjustable frequency drive according to the application
requirements by using the ordering number system.
For the FC 300 Series, you can order standard drives and drives with integral options by sending
a type code string describing the product a to the local Danfoss sales office, i.e.:
FC-302PK75T5E20H1BGCXXXSXXXXA0BXCXXXXD0
The meaning of the characters in the string can be located in the pages containing the
ordering numbers in the chapter How to Select Your VLT. In the example above, a Profibus
DP V1 and a 24 V back-up option are included in the drive.
Ordering numbers for FC 300 standard variants can also be located in the chapter How to Select Your VLT.
Use the Internet-based drive configurator to configure the right drive for the right application
and generate the type code string. The drive configurator will automatically generate an
eight-digit sales number to be delivered to your local sales office.
Furthermore, you can establish a project list with several products and send it to a Danfoss sales representative.
The drive configurator can be found on the global Internet site: www.danfoss.com/drives.
83
MG.33.B6.22 - VLT is a registered Danfoss trademark