Danfoss FC 300 Design Manual page 172

FC 300 Design Guide
This parameter cannot be adjusted while
the motor is running.
1-93 Thermistor Source
Option:
*
None
Analog input 53
Analog input 54
Digital input 18
Digital input 19
Digital input 32
Digital input 33
Function:
Select the input to which the thermistor (PTC
sensor) should be connected. An analog input option
[1] or [2] cannot be selected if the analog input
is already in use as a reference source (selected
in par. 3-15 Reference Source 1, 3-16 Reference
Source 2 or 3-17 Reference Source 3).
This parameter cannot be adjusted while
the motor is running.
default setting ( ) display text
*
172
How to Program
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark