Danfoss FC 300 Design Manual page 214

FC 300 Design Guide
Logic AND
*
Logic OR
Function:
Select control of the coasting function via the
terminals (digital input) and/or via the bus.
NOTE
This parameter is active only when
par. 8-01 Control Site is set to [0]
Digital and control word.
8-51 Quick Stop Select
Option:
Digital input
Bus
Logic AND
*
Logic OR
Function:
Select control of the Quick Stop function via the
terminals (digital input) and/or via the bus.
NOTE
This parameter is active only when
par. 8-01 Control Site is set to [0]
Digital and control word.
8-52 DC Brake Select
Option:
Digital input
Bus
Logic AND
*
Logic OR
Function:
Select control of the DC brake via the terminals
(digital input) and/or via the fieldbus.
NOTE
This parameter is active only when
par. 8-01 Control Site is set to [0]
Digital and control word.
8-53 Start Select
Option:
Digital input
Bus
Logic AND
*
Logic OR
default setting ( ) display text
*
214
How to Program
[2]
Select control of the frequency converter
[3]
start function via the terminals (digital input)
and/or via the fieldbus.
Select Bus [1], to activate the Start command via
the serial communication port or fieldbus option.
Select Logic AND [2] to activate the Start command
via the fieldbus/serial communication port, AND
additionally via one of the digital inputs.
Select Logic OR [3] to activate the Start command
via the fieldbus/serial communication port OR
via one of the digital inputs.
[0]
[1]
[2]
[3]
*
Select control of the frequency converter
reverse function via the terminals (digital
input) and/or via the fieldbus.
Select Bus [1], to activate the Reverse command via
[0]
the serial communication port or fieldbus option.
[1]
Select Logic AND [2] to activate the Reverse
[2]
command via the fieldbus/serial communication
[3]
port, AND additionally via one of the digital inputs.
Select Logic OR [3] to activate the Reverse
command via the fieldbus/serial communication
port OR via one of the digital inputs.
[0]
[1]
[2]
*
[3]
[ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark
Function:
NOTE
This parameter is active only when
par. 8-01 Control Site is set to [0]
Digital and control word.
8-54 Reverse Select
Option:
Digital input
Bus
Logic AND
Logic OR
Function:
NOTE
This parameter is active only when
par. 8-01 Control Site is set to [0]
Digital and control word.
8-55 Set-up Select
Option:
Digital input
Bus
Logic AND
Logic OR
[0]
[1]
[2]
[3]
[0]
[1]
[2]
[3]