Danfoss FC 300 Design Manual page 154

FC 300 Design Guide
0-14 Readout: Edit Set-ups / Channel
Range:
0 - FFF.FFF.FFF
Function:
View the setting of par. 0-11 Edit Set-up for each of
the four different communication channels. When
the number is displayed in hex, as it is in the LCP,
each number represents one channel.
Numbers 1-4 represent a set-up number; 'F'
means factory setting; and 'A' means active
set-up. The channels are, from right to left:
LCP, FC-bus, USB, HPFB1.5.
Example: The number AAAAAA21h means
that the FC bus selected Set-up 2 in par.
0-11, the LCP selected Set-up 1 and all others
used the active set-up.
0-2* LCP Display
"
Define the display in the Graphical Logic
Control Panel.
0-20 Display Line 1.1 Small
None
Profibus Warning Word
Readout Transmit Error Counter
Readout Receive Error Counter
Readout Bus Off Counter
Warning Parameter
Running Hours
kWh Counter
Control Word
Reference [Unit]
Reference %
Status Word
Main Actual Value [%]
Custom Readout
Power [kW]
Power [hp]
Motor Voltage
Frequency
Motor Current
Frequency [%]
Torque
* Speed [RPM]
Motor Thermal
KTY Sensor Temperature
Motor Angle
Phase Angle
DC Link Voltage
BrakeEnergy/s
BrakeEnergy/2 min
Heatsink Temp.
Inverter Thermal
default setting ( ) display text
*
154
How to Program
*
AAA.AAA.AAA
[0]
[953]
[1005]
[1006]
[1007]
[1013]
[1501]
[1502]
[1600]
[1601]
[1602]
[1603]
[1605]
[1609]
[1610]
[1611]
[1612]
[1613]
[1614]
[1615]
[1616]
[1617]
[1618]
[1619]
[1620]
[1621]
[1630]
[1632]
[1633]
[1634]
[1635]
[ ] value for use in communication via serial communication port
MG.33.B6.22 - VLT is a registered Danfoss trademark
Inv. Nom. Current
Inv. Max. Current
SL Control State
Control Card Temp.
External Reference
Pulse Reference
Feedback [Unit]
DigiPot Reference
Digital Input
Terminal 53 Switch Setting
Analog Input 53
Terminal 54 Switch Setting
Analog Input 54
Analog Output 42 [mA]
Digital Output [bin]
Freq. Input #29 [Hz]
Freq. Input #33 [Hz]
Pulse Output #27 [Hz]
Pulse Output #29 [Hz]
Relay Output [bin]
Counter A
Counter B
Ser. Com. Bus CTW 1
Ser. com. bus REF 1
Comm. Option STW
FC Port CTW 1
FC Port REF 1
Alarm Word
Alarm Word 2
Warning Word
Warning Word 2
Ext. Status Word
Ext. Status Word 2
PCD 1 Write to MCO
PCD 2 Write to MCO
PCD 3 Write to MCO
PCD 4 Write to MCO
PCD 5 Write to MCO
PCD 6 Write to MCO
PCD 7 Write to MCO
PCD 8 Write to MCO
PCD 9 Write to MCO
PCD 10 Write to MCO
PCD 1 Read from MCO
PCD 2 Read from MCO
PCD 3 Read from MCO
PCD 4 Read from MCO
PCD 5 Read from MCO
PCD 6 Read from MCO
PCD 7 Read from MCO
PCD 8 Read from MCO
PCD 9 Read from MCO
PCD 10 Read from MCO
Digital Inputs
Digital Outputs
Actual Position
Commanded Position
Actual Master Position
[1636]
[1637]
[1638]
[1639]
[1650]
[1651]
[1652]
[1653]
[1660]
[1661]
[1662]
[1663]
[1664]
[1665]
[1666]
[1667]
[1668]
[1669]
[1670]
[1671]
[1672]
[1673]
[1680]
[1682]
[1684]
[1685]
[1686]
[1690]
[1691]
[1692]
[1693]
[1694]
[1695]
[3401]
[3402]
[3403]
[3404]
[3405]
[3406]
[3407]
[3408]
[3409]
[3410]
[3421]
[3422]
[3423]
[3424]
[3425]
[3426]
[3427]
[3428]
[3429]
[3430]
[3440]
[3441]
[3450]
[3451]
[3452]