Table of Contents
Advertisement
Maximum Printing Areas and Margins
The maximum printing areas are as follows.
Model
MZ790
MZ770
Important!:
• No matter which size of originals is printed, the margins indicated on the figure are required for the originals.
Reduce the original if necessary to fit it inside of the margins. Place an original so that its end having a
margin at least comes to the left of the Stage Glass.
Tip:
About Printing Areas
• Printing area for the master is determined by the actual paper size detected on the Paper Feed Tray, regardless
of whether the original is being scanned, or sent from a computer.
• As shown in the illustration above, the printing area on the master will be smaller than the paper size (allowing
(7 mm) total margins for top and bottom,
exceeding the printing area for the master will not be printed.
• The maximum printing area can be applied to the scanned image, regardless of the print paper size.
"p.100
Materials Not to Be Printed
Do not use the machine in any manner which violates the law or infringes on established copyrights, even when mak-
ing copies for personal use. Consult your local authorities for further details. In general, use discretion and common
sense.
Maximum Printing Area
" × 16
" (291 mm × 425 mm)
11
/
/
7
3
16
4
" × 16
" (291 mm × 413 mm)
11
/
/
7
1
16
4
/
" (5 mm)
3
16
/
" (6 mm) for left and right). Peripheral areas in the original document
1
4
Usable Maximum Print Paper Size
" × 17" (297 mm × 432 mm)
11
/
11
16
/
" (2 mm)
1
16
/
" (3 mm)
1
8
/
" (3 mm)
1
8
Before Starting to Use
/
" (5 mm)
3
16
/
"
9
32
Originals
17
Advertisement
Table of Contents
Troubleshooting
