Riso SF5 Series How To Use

How to use
Glass platen
Paper feed setting lever
Feed tray ascent /
descent button
Feed-tray paper guides
lock lever
Paper feed tray
Vertical print position adjustment dial
*The operation explanations . illustrations . screen examples shown in this manual are of SF5250.
Sub panel
Display
[DENSITY] keys
For inquiries
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
● Please read the RISO SF series user's guide for more details.
series
Control panel
Receiving-tray
paper guides
Paper receiving tray
Power switch
Numeric display
Main panel
Numeric keys [START] key
[PRINT POSITION] keys
1
Preparation before printing
Turn on the power switch. Open the paper feed tray,
place the paper, align the right
and left paper guides to fit, and
turn the lock levers to lock the guides.
2

Placement of Originals

Glass platen
Auto Document Feeder AF-Ⅶ
（Optional Accessary）
or
Center mark
Align the original with Place the document face up,
the center facing downward align the document setting fence
and close the platen cover. to the width of the document,
and insert the front end of
the document all the way in.
3
Press the [START]key and check the proof copy
Set the master making Press the [START]key.
conditions as necessary. After master making,
one test print comes out.
4
Enter the number of copies to be printed using the numeric keys
Enter the number of copies to be Press the [START]key to print.
printed using the numeric keys.
This fence stops with a
click sound at each
position corresponding to
the standard paper sizes.
Adjust the paper feed pressure. Open the paper receiving tray,
slide the paper guides on the
(NORMAL) Newsprint paper, fine paper.
paper receiving tray to fit the
(CARD) Smooth cardstock, thick paper.
paper size.
Check that the "Ready to Make Master" is
displayed on the screen.
Adjusting the Print Density and the Adjusting the Print Position
Print Position in the horizontal direction in the vertical direction
Comfirm the test printing and adjust the printing position, density, etc.
When printing is complete, Turn off the power switch.
open the paper guides and
remove the paper.
Vertical print position Vertical print position
adjustment dial adjustment dial