Registering A Custom Paper Size [Custom Paper Entry]; Entering Sizes And Changing Names - Riso MZ790U Instruction Manual

Registering a Custom Paper Size
[Custom Paper Entry]
Non-standard paper sizes must be pre-entered into memory. Once a paper size is stored into memory, it can be
retrieved with the [Paper] button from the Master Making Basic Screen.
Up to 6 different sizes may be entered. Previously stored sizes can be modified or deleted.
You can register paper sizes between 3.9" × 5.8" (100 mm × 148 mm) to 13.4" × 21.9" (340 mm × 555 mm. However,
any paper longer than 17.2" (436 mm) prints in extended paper mode.
"p.175
Important!:
• Custom paper sizes must be entered. Failure to do so may result in incorrect scanning.
• 2-Color printing is not possible for paper lengths of 9.6" (246 mm) or less.

Entering sizes and changing names

1
Touch [Admin.] on the Basic Screen
for each mode.
2
Touch [OK].
3
Touch [System] or
[Custom Paper Entry] on the screen.
4
Touch [Custom Paper Entry].

Registering a Custom Paper Size [Custom Paper Entry]

Advanced Features
to display
173