Adjusting The Auto-Control Stacking Tray - Riso RP3700I User Manual

Touch the desired buttons for the
4
fine adjustment.
The Paper Guides and Paper Stop will move in
increments of 1mm (approx.
buttons are touched.
• The shift amount of the Side Guides and the
Paper Stop will be displayed on the Main
Display.
• If you make fine adjustments, the Paper Guides
and the Paper Stop will not work automatically
unless you touch the [Auto] button, or press the
Reset key .
The positions of the Paper Guides and
NOTE
the Paper Stop will return to the
predetermined position in accordance
with the size of the paper when the [Auto]
button is touched.
Button
Touch the [Close] button.
5
The window returns to the [Functions] window.

Adjusting the Auto-Control Stacking Tray

⁄ ") whenever the
3
64
Movable Part
Paper Stop
Paper Guides
Ready to Make Master
Stack Guide Adjust
0mm
0mm
A3/Black
Idle
Direction of movement
Towards the outside
of the tray
Towards the
printer
Towards the inside
of the tray
Towards the outside
of the tray
Ready to Make Master
Stack Guide Adjust
50mm
50mm
A3/Black
Idle
M
Close
Auto
13:59
M
Close
Auto
13:59
105