Stack Guide Control; High Capacity Feeder; High Capacity Stacker - Riso 9630R Administrator's Manual

Stack Guide Control (when using the auto-control stacking tray)
Specify which paper guides open when the paper guides open button is pressed
with paper in the auto-control stacking tray.
High Capacity Feeder (when using the high capacity feeder)
Configure to which position the standard tray is lowered when the machine runs
out of paper or when the standard tray descent button is pressed.
High Capacity Stacker (when using the high capacity stacker)
Configure to which position the stacking tray is lowered when the machine
finishes or pauses the job that outputs paper to the high capacity stacker.
• When set to [Do not lower], the stacking tray will not be lowered at the
end of the job. This setting is suitable when you output many jobs of
single pages (variable printing) or a small number of printouts. When
you output a small number of printouts, the time for waiting until the
stacking tray returns to the printing position can be shorted.
• When set to [Lower to the carriage], regardless of the number of
printouts, the stacking tray will be lowered to the carriage at the end of
the job. This will eliminate the need to press the button for lowering the
stacking tray when pulling out the entire carriage for a large amount of
printouts. However, it will not be possible to print the next job until the
printouts are removed and the stacking tray has returned to the printing
position.
• When set to [Lower to the specified position], the stacking tray will be
lowered to the specified position at the end of the job. Use this setting
to configure a position at which you can easily remove the printouts
when not using the carriage.
• When an equivalent of 3,200 to 4,000 sheets has been output to the
stacking tray, the stacking tray will be lowered to the carriage
regardless of the setting of [High Capacity Stacker].
Non RISO Ink Setting (Only on the Operation Panel)
Specify whether to prohibit or permit the use of Non-RISO ink for each color.
Barcode Area File Management (RISO Console only)
Register files to be selected for [Barcode Area Definition] of the printer driver.
The registered barcode area definition files are displayed in a list. You can
rename and delete files.
You can also export selected barcode area definition files and import the files to
another printer.
• The barcode area definition files can be created using the Barcode
Area Definition Software.
Setting / Description
Administrator Menu Setting Items
Set value / Details
[End], [Side], [Both]
See p. 50
[Do not lower], [Lower to the
carriage], [Lower to the specified
position]
Input value: 150 mm - 400 mm (6" -
15")
(Factory setting: 150 mm (6"))
See p. 43
• [Barcode Area File] list
• [Rename]
• Name: 1 to 30 alphanumeric
characters
• [Delete]
• [Import]
• [Export]
ComColor GD Series Administrator's Guide
27