Adjusting The Print Position [Print Position Adjustment] [1=2 Alignment] - Riso MZ790U Instruction Manual

Duplicator
Table of Contents

Advertisement

Adjusting the Print Position
[Print Position Adjustment] [1=2 Alignment]
The print position on the paper can be adjusted for each cylinder (drum).
Adjustment range Vertical direction: ±
The positioning may be adjusted while Printing is in progress.
Note:
• After adjusting the print position, print a proof copy to check the result.
"p.118
• The numerical value formed by "Print Position Adjustment" is the target. Set the actual position by verifying and
adjusting the printed material.
• Just after adjusting the print position of only one cylinder (drum), traces of the previous print position remain, which
may cause blurred printing. If this occurs, make several proofs until the remaining image disappears.
"p.118
• When adjusting the print position of both cylinders (drums) to the same location, you can do so by simply adjusting
one cylinder (drum). The other will be adjusted to the same print position.
"p.116
• Print position adjustment values for each cylinder (drum) are retained after printing is completed, to be applied for
subsequent master making processes. The values will retained until the
Press the
,
move up or down.
1
2
1)
Adjusting the print location for Cylinder (Drum) 1
2)
Adjusting the print location for Cylinder (Drum) 2
3)
Key
Each press shifts the print position downward in steps of
/
" (
about
0.5 mm).
1
64
Bottom
Top
19
/
" (±15mm) Horizontal direction: ±
32
,
or
key to
3
4
5
6
7
8

Adjusting the Print Position [Print Position Adjustment] [1=2 Alignment]

3
/
" (±10mm)
8
key is pressed or power is turned off.
4)
Key
Press the key to move the print image about
(
0.5 mm) to the left on the paper.
Left Side
Right Side
5)
Original Position Indicator
Indicates when positioning has not changed.
6)
Key
Each press shifts the print position upward in steps of
/
" (
about
0.5 mm).
1
64
Bottom
Top
7)
Key
Press to return to original position.
8)
Key
Press the key to move the print image about
(
0.5 mm) to the right on the paper.
Left Side
Right Side
Functions for Printing
/
"
1
64
/
"
1
64
115

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents