Location 11: Power Pc/Board Dx11 - Sirona GALILEOS Service Manual

Sirona Dental Systems GmbH
Service Manual GALILEOS
Error code Description
E6 11 01 Program sequence error.
Error code Description
E6 11 02 Watchdog error
Error code Description
E6 11 03 Operating system/resource error.
Error code Description
E7 11 04 Implausible data in EEPROM.
Error code Description
E6 11 05 RAM allocation failed.
Error code Description
E7 11 07 Unknown or invalid definition of unit
class.
Occurs during first power-on after
replacement of board DX6 or DX11.
61 25 665 D3437
D3437.076.01.15.02 06.2012
5.5.4

Location 11: Power PC/Board DX11

Location 11: Power PC/Board DX11
Actions required
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
● Acknowledge error and repeat procedure.
If the error occurs again ...
● Reset the entire calibration of the unit and
readjust the unit.
● Replace board DX11.
E6 11 02: GALILEOS Actions required
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Replace board DX11.
E6 11 03: GALILEOS
Actions required
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Replace board DX11.
E7 11 04
Actions required
● Check the unit configuration via service
routines S017 and S018 and reconfigure if
necessary.
● Check calibration with diaphragm test
exposures.
If the calibration is not OK ...
● Recalibrate the unit.
If the calibration is OK ...
● Make the individual unit settings again
(e.g. programming of the patient symbol
keys; see Operating Instructions).
E6 11 05: GALILEOS
Actions required
● Replace board DX11.
E7 11 07 Actions required
● Take the action required after replacing a
board.
5 Messages
5.5 List of error messages
see
S. [ → 61]
S. [ → 155]
S. [ → 350]
see
S. [ → 350]
see
S. [ → 350]
see
S. [ → 252],
S. [ → 272]
S.
S. [ → 155]
see
S. [ → 350]
see
S. [ → 347]
101