Configuration Process - Huawei AR150 Series Configuration Manual

Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
Pre-configuration Tasks
Before enabling debugging message output, complete the following task:
Starting the Router
Debugging occupies CPU resources on the device, affecting system running. After debugging,
run the undo debugging all command to disable it immediately.

Configuration Process

Table 3-14
Table 3-14 Configuration process for enabling debugging message output
No.
1
2
3
4
Issue 05 (2014-01-16)
NOTICE
lists the configuration process for enabling debugging message output.
Configuration Task
3.6.3.1 Enabling the
Information Center
3.6.3.2 (Optional)
Naming an Information
Channel
3.6.3.3 (Optional)
Setting the Timestamp
Format of Debugging
Messages
3.6.3.4 Configuring the
Device to Output
Debugging Messages to
the Log File
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information Center Configuration
Description
You can configure the
information center only
after the information
center is enabled.
By default, the
information center is
enabled.
You can easy-to-
remember names for
channels to facilitate
information center usage.
To adjust the time format
and time precision for
information output,
configure the timestamp.
After debugging
messages are output to a
log file, you can
download the log file
anytime to monitor device
running based on
debugging messages.
Remarks
Steps 2 and 3 are optional
and can be performed in
any sequence.
Steps 4 to 7 can be
performed in any
sequence. You can view
debugging messages in
the console or terminal.
53