The Three Operating Modes Of Smartpac 2 - Honeywell SmartPAC 2 User Manual

1126800

The Three Operating Modes of SmartPAC 2

SmartPAC 2 has three modes of operation: Initialization, Program and Run. The figure
below shows the main, or top, menu for each mode. Table 3 - 1, page 189 tells what each
mode is for, how to enter the mode and how to exit it. For more information about using each
mode, see the sections on the pages noted, and the chapter about each mode.
SELECT = HIGHLIGHT + ENTER
When we say "select" in this manual, it means highlight the item and then press ENTER.
NOTICE
To exit any mode, be sure you are in the main menu, shown below. If you are not in the
main menu, press RESET repeatedly until the main menu appears.
Initialization Mode (Chapter 4)
white text on dark blue display
settings for the press
Figure 3 - 17. The Three Operating Modes, Showing Main Menus
Page 188
Run Mode (Chapter 6)
black text on light blue display
live screens; some adjustments possible "on the fly"
Chapter 3
SmartPAC 2 with WPC Integration
Program Mode (Chapter 5)
black text on light green display
settings for individual tools
SmartPAC 2 Keyboard, Displays
and Operating Modes