Table of Contents
Advertisement
SmartPAC 2 with WPC Integration
View Cam Summary
To see the cam settings for the tool you are programming, in the Cam Program menu, Figure
5 - 27, press F6-"View Cam Summary." A screen appears similar to the next figure,
showing channel number, cam name, type of timing and the timing settings.. The global
cams do not appear in this screen.
Make an ON/OFF Setting for a Channel
NOTICE
You can set multiple ON/OFF cycles for cam channels if you want. See "Multiple ON/OFFs for
Cam Channels," page 307.
1.
Select a channel from the complete list (see previous figure). You will see the display
below. Notice that the tool number and channel name selected are shown in the display.
Select "Program on/off angle."
SmartPAC 2 Program Mode
Figure 5 - 29. Cam Summary
Chapter 5
1126800
page 305
- Quick Links:
- Smartpac 2
Hide quick links:
Advertisement
Table of Contents
