Chapter 2 - Operations; Overview Of Operation Modes - Honeywell TR80 Installation And Operating Manual

CHAPTER CHAPTER
2 2
OPERATIONS
This chapter gives information about the operation that users can perform once
the device is ready to use.

2.1 Overview of Operation modes

The wall module is designed with various operating modes. The device will switch
between these modes with user actions, or automatically on predefined timeouts.
Depending on the configuration, some modes may be disabled entirely, or have
restricted access requiring a key-combination or Pin entry.
The various available modes are as follows:
• Sleep Mode
Display and buttons back-light is OFF. LED ring remains ON or OFF depending
on the configuration.
• Display Only Mode
This mode allows the user to monitor room temperature, setpoint, and other
available current values. No changes or commands are allowed. Display shows
• Operating Mode
In this mode user can monitor current status and values. Additionally user can
change HVAC setpoint, control lights and blinds but cannot do any changes to
configuration.
• Setup/Configuration Mode
This mode is available only for the installer. In this mode, installer can perform
the configuration of various parameters, by following the specific installation
procedure or as per the user preferences.
Display shows
enter four digit pin.
TR80 - Installation and Operation Guide
(lock) icon.
Setting icon on the screen. To access this mode user need to
17