Table of Contents
Advertisement
1126800
SELECT NAME FOR
CAM CHANNEL 1
USE THE CURSOR KEYS
TO CHOOSE A NAME.
PRESS THE ENTER
KEY TO SELECT THE
NAME.
PRESS THE RESET
KEY WHEN DONE.
Figure 4 - 7. Selecting Cam Name for "Channel 1"
4.
If you do not find a suitable name but you still want to name the cam, you can select
"Custom' Name," by highlighting it and pressing ENTER.
NOTICE
You can use a separate computer keyboard to enter names. See page 270.
5.
Your names can be any combination of alpha-numeric characters, symbols, etc.
Pressing the CLEAR key clears the text.
a.
To key in letters: Use the up, down, left, and/or right cursor keys to highlight the
desired letter; then press ENTER.
b.
To key in numbers: Use the number keypad; then press ENTER.
c.
To accept your selection, press function key F6. To cancel you selection, press
RESET. (For assistance in using the various keys, refer to Chapter 3.)
6.
After you have named channel 1, you will be returned to the previous menu where
channel 2 automatically is highlighted for you. You can select a name for it. Continue in
this manner until all your cam channels have been named.
7.
When you are completely done, press RESET to return to the Main Initialization menu.
The display showing your channels will not change to show the new channel names. It
Page 212
MORE NAMES
PRESS CLEAR TO CLEAR
A
B
C
D
E
TEXT. USE THE KEYPAD
G
H
I
J
K
F
TO ENTER NUMBERS. USE
M
N
O
P
Q
L
CURSORS TO SELECT THE
S
T
U
V
W
R
LETTERS. PRESS ENTER
Y
Z
,
-
#
X
TO ENTER THE LETTERS.
(
)
*
/
&
.
PRESS F6 WHEN DONE.
PRESS RESET TO CANCEL.
Figure 4 - 8. Custom Name Entry Box
Chapter 4
SmartPAC 2 with WPC Integration
U N N A M E D
"CUSTOM" NAME
ACTIVATE GAG
ADVANCE SLIDE
ANTI-BACK REL.
BYPASS 1
BYPASS 2
CONVEYOR
CUTOFF
FEED ADVANCE
FEED COMPLETE
FEED ENABLE
INSPECT DEV 1
INSPECT DEV 2
OUTLET 1
OUTLET 2
SmartPAC 2 Initialization Mode
- Quick Links:
- Smartpac 2
Hide quick links:
Advertisement
Table of Contents
