Install Wpc Without Enclosure - Honeywell SmartPAC 2 User Manual

Press automation control with wintriss wpc clutch/brake control
Table of Contents

Advertisement

1126800

Install WPC Without Enclosure

When you order WPC without enclosure, you receive the "control assembly"—the various
processor boards that make up the basic system. See Figure 2 - 5, below, for mounting
dimensions and clearances.
Mount the control assembly so that it is convenient during installation and maintenance.
Your control enclosure does not have to be mounted to the press. It can be mounted on a free
standing pedestal, pendant, or column. For easy access to the interior, make sure that there is
enough room to open your control enclosure door at least 120°.
After you mount the control assembly in your enclosure, go to "Wiring the WPC," page 35,
and make the necessary connections.
1.0
(25)
Allow clearance
as indicated by
broken line
and 5.5 inches
(140 mm) from
mounting surface
1/4-20 screws
for mounting
4 places
1.0
(25)
Figure 2 - 5. Mounting dimensions for Non-enclosure WPC
Page 34
(394)
3.5
7.00
(89)
(178.0)
Control assembly
including
WPC boards
Chapter 2
SmartPAC 2 with WPC Integration
15.5
Installing SmartPAC 2 and WPC
Dimensions:
inches (mm)
15.5
15.5
(394)
(394)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents