Select A Tool To Load - Honeywell SmartPAC 2 User Manual

SmartPAC 2 with WPC Integration

Select a Tool to Load

1. The Tool Manager screen appears, similar to the next figure.
2. In this display, highlight the tool number you want to load. Then press F5-"Load
Tool." The following box appears.
3. In this box you can enter values for job number, part number and good parts preset. Use
the cursor keys to select any of those items you want to change. A numeric entry box
appears. Enter the number and then press ENTER to accept it. When you are done
changing items, highlight the tool number and press ENTER. The following warning box
appears.
SmartPAC 2 Run Mode
Figure 6 - 26. Tool Manager Screen
Figure 6 - 27. Tool to Be Loaded
Chapter 6
1126800
F1
F2
F3
F4
F5
F6
F7
F8
page 359