Program/Run Key Switch - Honeywell SmartPAC 2 User Manual

SmartPAC 2 with WPC Integration

Program/Run Key Switch

SmartPAC 2
POWER
BRAKE
WARNING
You use the Program/Run key switch to change between Run and Program modes. The
switch had a removable key so that access to Program and Run modes can be controlled.
• When you turn the key toward "Run," SmartPAC goes into Run mode.
• When you turn the switch toward "Prog," it goes into Program mode.
For more information about SmartPAC 2's operating modes, see "The Three Operating
Modes," page188 and chapters 4, 5 and 6.
NOTICE
SmartPAC will change from Run to Program or vice versa only when the display shows the
main menu in the mode you are leaving. If you turn the key and nothing happens, press
RESET repeatedly until you see the new mode appear on the display.
SmartPAC 2 Keyboard, Displays
and Operating Modes
CAMBIE F1
AL ESPANOL
F2
F3
F4
F5
F6
F7
F8
1 2 3
PROG RUN
ENTER
4 5 6
HELP
7 8 9
RESET
0 .
CLEAR
Chapter 3
Program/Run
key switch
PROG RUN
Page 183
1126800