Honeywell SmartPAC 2 User Manual page 44

Press automation control with wintriss wpc clutch/brake control
Table of Contents

Advertisement

1126800
Specifications: SmartPAC 2 with WPC
SmartPAC 2
Communications
Options,
continued
Preventative Maintenance (PM) Monitor
SmartPAC 2
Options,
Bilingual* ( English/Spanish) status/adjust menus
continued
*Consult product user manual. (i.e., DSI 2: #1121900; AutoSetPAC: #1101600; WaveFormPAC:
#1109100; PACNet 3 Computerized Pressroom Reporting #1126200 [includes RSR] or RSR 3
Standalone: #1126900, RamPAC: #1115200; ProPAC: #1117500; Bilingual (English/Spanish):
#1102900).
Shadow V ® or Shadow VI ® Light Curtains
WPC Options
in heights from 6 to 60"; 25' or 50' scanning range; refer to Shadow literature for more
information.
WPC Options
Firmware
Muting for Shadow light curtain on the upstroke; Two-hand only; One-hand ** , two-hand
or foot operation ** ; Automatic Single Stroke (external trip); Continuous on Demand;
Auto Compensated Top Stop (ACTS); High Speed (>500 SPM).
WPC Options
Selector Switches
One-hand, two-hand or foot operation**; Automatic Single Stroke (External Trip) to
slave the press to an external device; control switch for two operator stations; Micro-
inch on / off
WPC Options
Foot Switch
Safety switch for foot actuation** (foot operation firmware required)
WPC Options
One-hand Control
Control for one-hand actuation ** (one-hand operation firmware required)
WPC Options
Counterbalance Air Pressure Switch
12-150 PSI; monitors counterbalance supply (uses one customized input)
WPC Options
Bar Mode Control
Allows manual turning of crankshaft
WPC Options
Remote Crank-angle clock display
Second display can be installed up to 100' away
WPC Options
Motor Control and Custom Packages
Refer to Press/Control Motor Starter literature, and/or contact your Wintriss
representative or factory for more details.
** Shadow light curtain required
Page 22
Connects via Ethernet to local area network and data viewed via the Internet using
SmartView remote viewing utility
Can connect to network running PACNet Computerized Pressroom
Reporting* software
Can be used with RSR ™ remote storage and retrieval* software
Chapter 1
SmartPAC 2 with WPC Integration
Introduction to SmartPAC 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents