Figure 4 - 11. Global Cams, Select Cam Channel - Honeywell SmartPAC 2 User Manual

SmartPAC 2 with WPC Integration

Figure 4 - 11. Global Cams, Select Cam Channel

3. Select the cam you want to program. The following screen appears.
4. Select the type of cam timing you want to set. Set the timing according to the
instructions at "CAM SWITCH," page 302, in Chapter 5.
5. When you have completed setting the timing, press RESET.
NOTICE
If you set or change global cams while a tool is loaded, you must reload the tool to make the
global cams take effect.
SmartPAC 2 Initialization Mode
Asterisk (*) Indicates Global Cams
Figure 4 - 12. Global Cam Timing Type
Chapter 4
1126800
F1
F2
F3
F4
F5
F6
F7
F8
page 217