Configuring Univerge Um8500 For The Integration - NEC UNIVERGE UM8500 Integration Manual

Configuring
UNIVERGE
UM8500 for the
integration
UNIVERGE UM8500 I
56
After ensuring that the messaging system server is ready for the integration
by completing all appropriate tasks in the Installation Guide, perform the
following procedure to confirm that the integration is enabled.
To confirm that the integration is enabled
Start > All Programs > UNIVERGE UM8500 > Edit Switch
1
Click
2
If prompted for logon credentials, type the administrator extension and
OK
password, then click
On a new install the logon credentials are:
Extension = 99995
Password = 12345
3
Confirm that the settings match those in the following table.
Phone system settings
Parameter
Manufacturer
Model
Switch software version
Integration
4
If the settings are incorrect, select the correct settings and click
Voice Mail Now
.
G
NTEGRATION UIDE
.
Required setting
Fujitsu
9600
All
Serial
.
Update