Programming The Phone System - NEC UNIVERGE UM8500 Integration Manual

Programming
the phone
system
If you use programming options other than those described in the following
procedure, the integration's performance may be affected.
To program the phone system
1
Assign a DCC port for integration with UNIVERGE UM8500.
2
On the phone system, in
Fujitsu 9600 phone lines used as voice messaging ports.
Change service parameter
3
In
Fujitsu 9600 phone lines used as voice messaging ports.
NOTE
The settings in step
Assign single line phone
2
, set Type to and ID:01 to
disable the immediate ring feature.
3
F 9600/SMDI
UJITSU
1
, set Type to for the
01
for the
57