NEC UNIVERGE UM8500 Integration Manual page 320

UNIVERGE UM8500 I
310
10
Use the VoipAdmin Tool to configure the messaging system.
See "Configuring UNIVERGE UM8500 for
Start the messaging system. Sphere creates a SIP trunk, but you cannot use
the extensions at this time.
11
On the Sphericall Administrator you should see the messaging system listed
Trunks
on the tab.
F5
Press to refresh the data displayed in the Trunks tab.
+
12
Click to expand the messaging system hub entry.
Port 1
13
Right-click and select
The Properties window port appears.
General
14
Click the tab.
Depending on your licenses, type the appropriate values in the
Capacity Inbound Capacity
,
If you do not know these values, type an
is equal or greater than the total number of ports that you are using on the
messaging system.
Total Capacity
In the
values. For example, you have 12 licensed voicemail ports. Type at least
Inbound Outbound
both and
least the sum 24.
15 In Service
Select the
G
NTEGRATION UIDE
integration"
View Properties
.
Outbound Capacity
, and
Inbound
field, type the sum of the
Total Capacity
fields, in the
check box.
on page 313.
Total
fields.
Outbound
and value that
Inbound Outbound
and
12
field, type at
in