Configuring
UNIVERGE
UM8500 for
integration
UNIVERGE UM8500 I
88
After ensuring that the messaging system server is ready for the integration by
completing all appropriate tasks in the Installation Guide, perform the following
procedure to confirm that the integration is enabled.
To confirm that the integration is enabled
1
Start > All Programs > UNIVERGE UM8500 > Edit Switch
Click
2
If prompted for logon credentials, type the administrator extension and
OK
password, then click
On a new install the logon credentials are:
Extension = 99995
Password = 12345
3
Confirm that the settings match those in the following table.
Phone system settings
Parameter
Manufacturer
Model
Switch software version
Integration
4
If the settings are incorrect, select the correct settings and click
Voice Mail Now
.
G
NTEGRATION
UIDE
.
Required setting
Mitel
SX 2000 or newer
N16 or later
T1 E&M
.
Update