Integration Overview; Integration Steps; Requirements - NEC UNIVERGE UM8500 Integration Manual

Integration
overview
UNIVERGE UM8500 I
138
Use this section of the Integration Guide with the Installation Guide.

Integration steps

Follow these steps to set up this integration.
Review the system and equipment requirements.
1
Verify that all phone system and messaging system server requirements have
been met. See "Requirements," below.
Configure UNIVERGE UM8500 for the integration.
2
See "Configuring UNIVERGE UM8500 for the
Program the phone system and extensions.
3
See "Programming the phone

Requirements

The steps to set up the NEC NEAX
following:
Phone system
NEAX 2400 IMS, revision HDS 5200 R4 or later, installed and ready for the
●
integration as described in the phone system documentation.
One or more of the following digital line cards set up as voice messaging ports
●
connected to the voice boards in the messaging system server:
Card name
16ELCH (with SP-3125)
16ELCJ
16ELCJ-B
16ELCJB-A
CAUTION
Use only the black and yellow pair of wires. The RJ-14
connectors on the Dialogic D42-NE2 voice board use only
a single pair of wires.
UNIVERGE UM8500 server
The Dialogic digital voice boards installed; see the Installation Guide for
●
installation details.
NOTE
For the latest information on supported voice boards for UM8500,
contact a sale representative.
UM8500 installed and ready for the integration as described in the
●
Installation Guide.
A system key that enables the integration and the appropriate number of
●
voice messaging ports.
G
NTEGRATION UIDE
integration"
system" on page 141.
®
2400 direct digital integration require the
Description
Digital line card, 16 ports
Digital line card, 16 ports
Digital line card, 16 ports
Digital line card, 16 ports
on page 140.