Installing The Oai Integration Server Software - NEC UNIVERGE UM8500 Integration Manual

Installing the
OAI
Integration
Server
software
Before configuring the OAI integration, the OAI integration software must be
installed on the computer where the messaging system is installed.
To install the OAI Integration Server
1
Insert the Installation disc into the disc drive.
2
From the Windows taskbar, click
Browse
3
Click , then in the Browse dialog box, open the Voice
Mail\OAIIntegration folder on the disc.
4
Click setup.exe, then click
5
In the Run dialog box, click
6
On the Welcome page, click
7
On the Customer Information page; if the
Name
fields do not have your information, enter your information into the
fields. Select an option indicating whether or not you or anyone else who uses
the computer has access to the program. Click
8
On the Setup Type page, confirm that
9
On the Start Copying Files page, click
10
When setup is complete, click
A new Program Group, Active Voice, is added to the program list. Two new
applications are added to this program group: AvOAIGear and AvOAITray.
These applications are used to set up the OAI integration parameters.
To choose a predefined template for the integration in the
OAI Integration Server
1
Insert the Installation disc into the disc drive.
2
From the Windows taskbar, click
Browse
3
Click , then in the Browse dialog box, open the Voice
Mail\OAIIntegration\OAI Server XML Templates\Single Server folder on the
disc. This will show a group of folders that contain predefined sets of XML
configuration files meant to help choose the best OAI configuration.
Open the appropriate folder for the integration.
For UNIVERGE SV8300 phone systems using OAI pure integration, open
■
NEC IPS 2000 - OAI Pure - No CCIS
the
For UNIVERGE SV8300 phone systems using OAI UCD - Serial MCI
■
integration, open the
NOTE
The files used for the UNIVERGE SV8300 OAI integration are
the same as those used for the NEC IPS 2000 OAI integration.
4
From the selected folder, copy and replace the existing AvOAISvr.xml file to
Program Files\Active Voice\OAIIntegration
the
UM8500 server.
The Program Files folder is usually found on the partition where Microsoft
Windows was first installed, for example: C:\Program Files\Active
Voice\OAIIntegration.
NEC UNIVERGE SV8300
Start Run
> .
Open
.
OK
. The installation wizard begins.
Next
.
User Name
Next
Typical is selected
Next
.
Finish
.
Start > Run
.
folder.
NEC IPS 2000 - OAI-UCD - MCI
OAI
USING
Customer
and
.
Next
, then click .
folder.
folder on the
229