Table of Contents
Advertisement
Configuring
UNIVERGE
UM8500 for the
integration
After ensuring that the messaging system server is ready for the integration by
completing all appropriate tasks in the Installation Guide, perform the following
procedure to confirm that the integration is enabled.
To confirm that the integration is enabled
1
In Internet Explorer, go to the UM8500 Administrator
(http://<server name>/saweb)
System
Licensing
2
Go to
>
3
Integration
In the
box, confirm that the setting is
IP Protims
4
If the setting is not
necessary system key.
System
Switch
5
Go to
>
following table.
If the settings are incorrect, integration features might not be enabled.
Phone system settings
Parameter
Manufacturer
Model
Switch Software Version
Integration
6
Enter the MWI analog codes that the SV8300 phone system uses for turning
the phones lamps on and off. Save the changes.
7
Stop UNIVERGE UM8500.
8
Run VOIPAdmin.exe from Commserver\Utilities folder.
The VoipAdmin Tool appears.
9
Enter IP address of the phone system.
10
Set the general functionality for the ports as Terminal.
Manage ports
11
Under
Enter the Extension and Password for each port.
12
If the system uses one or more IP PADs, under Manage Gateways click
Enter the IP Address and set the
OK
13
Click
to save the changes and then close VOIPAdmin.
14
Start UNIVERGE UM8500.
15
In Internet Explorer, go to the UM8500 Administrator
(http://<server name>/saweb)
System
Ports
16
Go to
>
Port Table section of the page. If the extensions are incorrect, stop UNIVERGE
UM8500, verify the phone system settings made for the voice messaging
ports, see
"To program the IP voice messaging ports in the phone
page
216, and use the VOIPAdmin tool to make the necessary adjustments.
NEC UNIVERGE SV8300
.
Licensed Features
>
, contact a sales representative for the
. Confirm that the settings match those in the
Required setting
NEC
UNIVERGE SV8300
DTERM-IP Ports
VOIP-PROTIMS
Add
, click
to add a new port.
Has DSP
to
for each gateway.
0
.
and check the extension of each port displayed in the
IP P
WITH
ROTIMS
.
IP Protims
.
Add
.
system"
on
219
Advertisement
Chapters
Table of Contents
Troubleshooting
