Voice Mail Integration Options - NEC univerge sv8100 User Manual

Issue 7.00
P
S 5
ROGRAM
ECTION

45-01 Voice Mail Integration Options

Description
Use
integration options.
Input Data
Item
No.
01
02
03
04
05
06
14
15
16
3 - 382
45 V
OICE
Program 45-01 : Voice Mail Integration Options
Item
Voice Mail Department Group Number
Assign which Extension (Department) Group
number is to be assigned as the voice mail
group (non-networked system).
Voice Mail Master Name
Enter the Voice Mail master name
(non-networked system).
--- Not Used ---
Park and Page
Enable/disable the system ability to process the
Voice Mail Park and Page (Q) commands. You
should normally enable this option.
Message Wait
Enable/disable the system ability to process the
Voice Mail Message Wait (
should normally enable this option. If enabled,
be sure that the programmed Message
Notification strings don't contain the code for
trunk access.
Record Alert Tone Interval Time
This time sets the interval between voice Mail
Conversation Record alerts
Centralized Voice Mail Number
Assign the pilot number to Centralized Voice
Mail over networking Link. This is assigned
only in the remote switches.
Analog Voice Mail Protocol Selection
Voice Mail Fax Digit Add Assignment
M I
AIL NTEGRATION
0 = No Voice Mail
Up to 12 Characters
) commands. You
#
Dial (up to 8 digits)
0: Fixed
1: Program
Up to four digits
to customize certain voice mail
Input Data Default
0~64
Voice Mail
0 = Off
1 = On
0 = Off
1 = On
0~64800 (sec)
No Setting
None
0
1
1
30
0
Programming