Setting Up The Neax 2000 Ips - NEC UNIVERGE UM8500 Integration Manual

UNIVERGE UM8500 I
124
To set OAI monitored function keys for Live Record
If the Live Record feature will be used in the phone system, verify that the system
has the following settings or that the configuration files are updated.
1
The OAI LiveRecord feature uses the following settings by default.
WARNING!
If these defaults are changed, the corresponding settings in the
OAI Integration Server must be set up accordingly by editing the
XML configuration file.
Dterm Function
Function Code
Key
09 F1032
10 F1033
11 F1034
12 F1035
2
When using LiveRecord, the monitored extensions or voice ports are allowed
to use Executive-Override with the LiveRecord feature. Normally, the OAI
monitoring is set by CMD17,Y=1, Extension>3, but this value will
automatically activate the Off-Hook Suppress bit. Instead, the
UNDOCUMENTED value of 4 that will take the Off-Hook Suppress OFF is
used.
3
The Executive Override code programmed on the phone system command
200>A4>A006, for example, should match the BargeInCode parameter setting
in the UNIVERGE UM8500 integration file. In this case the code is *4 and the
UM8500 entry is BargeInCode = X,&,*4

Setting up the NEAX 2000 IPS

NOTE
The following procedures are written with the assumption that you
will use a digital NEC Dterm Series E phone, using the Customer
Administration Terminal (CAT) mode, to enter the settings
presented in the procedures.
To set the B-Load and C-Load
1
Set the sense wheel on CP14 to
2
Wait for minor alarm to occur.
3
Set the sense wheel back to
4
After minor alarm clears, set the sense wheel to
5
Wait for minor alarm to occur.
6
Set the sense wheel back to
CAT-MODE key usage
To accomplish certain tasks, use the following keys on Dterm phone.
Task
Initiate
Data Entry
Execute
Command Prompt
Step
G
NTEGRATION UIDE
Terminal Mode LiveRecord
Facility (TMF) Function
Code
192 Record
193 Pause/Resume
194 Re-record
195 End
B SW1
and press .
0
.
C
and press
0
.
Key(s)
Transfer + Conf + * + Transfer + Conf + #
Recall
Conf
Redial
Speaker
SW1
.