NEC UNIVERGE UM8500 Integration Manual page 24

UNIVERGE UM8500 I
14
To set up subscribers
1
At the phone system programming terminal, type
followed by the subscriber's extension number, then press
example, extension 555 is used in the screen below.
2
For the 7434D emulation only; in the
includes the subscriber's extension number, the maximum is 15 characters.
This restriction does not apply to the 8434D (7405ND) emulation.
NOTE
The Name field must be set up correctly for the integration to
work. For more details on how to set up these fields, refer to the
phone system manufacturer's documentation.
Coverage Path
3
In the
of the "To set up the coverage path" procedure on the previous page, then
ENTER
press . For example, the number 1 is used in the screen below.
4
Repeat steps 1 through
Next step
Test the extensions. See Appendix B,
G
NTEGRATION UIDE
Name
field, confirm that the name
field, type the coverage path number created in step 1
3 for each subscriber extension.
"Testing the extensions" on page 338.
change station
ENTER
. For