Integration Overview; Integration Steps; Requirements - NEC UNIVERGE UM8500 Integration Manual

Integration
overview
UNIVERGE UM8500 I
106
Use this section of the Integration Guide with the Installation Guide.

Integration steps

Follow these steps to set up this integration.
Review the system and equipment requirements.
1
Verify that all phone system and messaging system server requirements have
been met. See "Requirements," below.
Configure UNIVERGE UM8500 for the integration.
2
See "Configuring UNIVERGE UM8500 for the
Program the phone system and extensions.
3
See "Programming the phone

Requirements

The steps to set up the NEC NEAX
following:
Phone system
NEAX 2000 IVS, 1300 series, revision NJ 4.04 or later, installed and ready for
●
the integration as described in the phone system documentation.
One or more of the following digital line cards set up as voice messaging ports
●
connected to the voice boards in the messaging system:
Card name
PN-2DLCB
PN-2DLCN
PN-4DLCA
PN-4DLCD
PN-4DLCM
PN-4DLCQ
PN-8DLCP
CAUTION
Use only the black and yellow pair of wires. The RJ-14 connectors
on the Dialogic D42-NE2 voice board use only a single pair of
wires.
UNIVERGE UM8500 server
The Dialogic digital voice boards installed; see the Installation Guide for
●
installation details.
NOTE
For the latest information on supported voice boards for UM8500,
contact a sale representative.
UM8500 installed and ready for the integration as described in the
●
Installation Guide.
A system key that enables the integration and the appropriate number of
●
voice messaging ports.
G
NTEGRATION UIDE
integration"
system" on page 109.
®
2000 direct digital integration require the
Description
Digital line card, 2 ports
Digital line card, 2 ports
Digital line card, 4 ports
Digital line card, 4 ports
Digital line card, 4 ports
Digital line card, 4 ports
Digital line card, 8 ports
on page 108.