NEC UNIVERGE UM8500 Integration Manual page 184

UNIVERGE UM8500 I
174
Enabled:
This Enables/Disables the Live Record functionality. The default
value is True.
TMFC-Record:
Enter the Terminal Mode Function Code for the Record
command for Live Record. The default value is 192 as this is the predefined
function in the phone system, but can be changed if needed.
TMFC-Pause: Enter the Terminal Mode Function Code for the Pause
command for Live Record. The default value is 193 as this is the predefined
function in the phone system, but can be changed if needed.
TMFC-ReRecord:
Enter the Terminal Mode Function Code for the ReRecord
command for Live Record. The default value is 194 as this is the predefined
function in the phone system, but can be changed if needed.
TMFC-End:
Enter the Terminal Mode Function Code for the End command
for Live Record. The default value is 195 as this is the predefined function in
the phone system, but can be changed if needed.
KC-Record:
Enter the OAI Key Code used for the Record command on a
Dterm function key. To disable monitoring of the key, enter 0 or a negative
number. The default value is 1.
KC-Pause:
Enter the OAI Key Code used for the Pause/Resume command
on a Dterm function key. To disable monitoring of the key, enter 0 or a
negative number. The default value is 2.
KC-Rerecord:
Enter the OAI Key Code used for the ReRecord command on
a Dterm function key. To disable monitoring of the key, enter 0 or a negative
number. The default value is 3.
KC-End:
Enter the OAI Key Code used for the End command on a Dterm
function key. To disable monitoring of the key, enter 0 or a negative number.
The default value is 4.
ToggleStartStop:
This feature allows the user to press a single key to start,
stop, or restart a Live Record session. To enable the feature, enter True. To
disable the feature, enter False. The default value is True.
6
If using a template that enables the OAI UCD-MCI serial integration, in the
navigation panel of the configuration file, expand the MCI-Serial node.
NOTE
Do not complete this step if a template other than the NEC NEAX
2400 - OAI-UCD - MCI Serial template, where the phone system
cmd ASYDL Sys 1 Index 833 Bit 0 value is 0, was selected.
The settings must match the settings of the phone system for the MCI Serial
connection.
Format.
Enter the format of the MCI-serial packets expected from the
phone system. Enter
ICS
expanded (IMX) packets. The default is ICS.
COMPort.
Enter the COM number of the serial port. This is the voice server
serial port that is connected by the RS-232 cable to the MCI link on the phone
system. Accepted values are
BaudRate.
Enter the baud rate used by the serial (RS-232/MCI)
communication. The value must be identical to the phone system setting.
1200
Accepted values are
phone system setting. The default value is 9600.
DataBits.
Enter the default phone system data bits. Accepted values are
5 6 7 8
, , , or . The default value is 8.
Parity.
Enter the parity used by the serial (RS-232/MCI) communication
with the phone system. Accepted values are
ODD. The default value is N.
G
NTEGRATION UIDE
for regular (ICS/IVS) serial packets, or
COM1 COM2
or . The default is COM1.
2400 4800 9600
, , , , or the specially defined
N
for NONE,
for
IMX
4
,
E O
for EVEN, or for