NEC UX5000 User Manual

NEC UX5000 Multibutton Telephone
KEYS ON YOUR PHONE:
SOFT KEYS - Under the display
CHECK - Check programming on keys
CLEAR - Exit key
FUNCTION KEYS - Keys with lights
CALL1 - Intercom key
CALL2 - 2nd Intercom key
DND - Do Not Disturb
MENU - For system programming
DIAL - Access to system speed dial
FLASH - Used with line features
MIC - Mute for speaker phone
LND - Last Number Dialed (Redial)
DIR - Directory dialing from display
HOLD - Hold/Transfer key
SPK - Speaker
CONF - Conference
TO PLACE AN INTERNAL CALL:
Lift handset or press SPK
Dial extension
or
press DSS (Direct Station Select) key
TO TRANSFER A CALL:
With call in progress
Press DSS button
Announce call (optional)
Hang up
OR
with call in progress
Press HOLD
Dial extension
Announce call (optional)
Hang up
Phone: 303-773-1200
User Features
TRANSFER CALL TO VOICEMAIL:
With call in progress
Press HOLD
Press VMSG in interactive display
Press DSS button or ext. #
Hang up
TO PICKUP CALLS FROM NON-
RINGING PHONE:
Press * # from any phone
Note: This will pickup phone that has been
ringing the longest.
**Ext. will pick-up a specific extension
TO MAKE CALL WITH
ABBREVIATED DIALING/DIAL BY
NAME DIRECTORY:
Press Dir using soft keys
Press ABB
Use dial pad to access first letter
Scroll up or down using arrow keys
When desired number is displayed lift handset or
press SPK
TO PLACE YOUR PHONE INTO
DO NOT DISTURB:
Press DND key
Press 1 for external calls ONLY
Press 2 for internal calls ONLY
Press 3 for all calls
Press 0 to cancel
Note: If DND key is pressed without entering a
code, in ten seconds it will automatically go to
DND all calls, by pressing DND again and waiting
ten seconds it will automatically cancel.
www.kcgtel.com
Email: kcg@kcgtel.com