NEC UNIVERGE UM8500 Integration Manual page 43

Field
ForwardMaximumHopCount
MessageWaitingOffDN
MessageWaitingOnDN
VoiceMail
To specify MWI and voice mail extensions in CallManager
version 3.05
1
In the CallManager Administration program, select
Parameters
.
2
In the list of servers on the left side of the Service Parameters Configuration
page, click the server that CallManager is installed on.
3 Configured Services
In the
Configured Services Parameters
4
In the
parameters shown in the following table.
5
Change or enter a value, as appropriate.
6 Update
Click to save the change.
7
Repeat steps 4 through
appropriate.
8
Shut down and restart the CallManager server.
Value
The maximum number of times a call can be forwarded. Specify a value
that is 6 greater than the number of CallManager ports that are connected
to the UNIVERGE UM8500 server. This ensures that a call reaches the last
port in the hunt group even if the call is forwarded by UM8500 several
times, for example, if the system is a 72-port UM8500 system, specify
ForwardMaximumHopCount
"78" for
The extension that turns MWIs off.
The extension that turns MWIs on.
The extension that users call to access UM8500. This is typically the
extension number, the
Administration program, of the first uOne port. If an extension is specified
for VoiceMail , then users can call UM8500 simply by pressing the
message waiting indicator button on their Cisco phones.
Cisco CallManager
list, click
list, click one of the four
6 to specify values for the other parameters, as
.
Directory number
in the Cisco CallManager
C C M
ISCO ALL ANAGER
Service Service
>
.
33