NEC UNIVERGE UM8500 Integration Manual page 310

UNIVERGE UM8500 I
300
To program subscriber stations
The remaining Siemens 9751 CBX programming involves individual subscriber
extensions. By forwarding a subscriber to the integration pilot number, integrated
call answering is provided.
Some phone system software versions allow two forwarding paths. Program call
forwarding for internal, external, busy, and ring-no-answer conditions to suit
subscriber needs.
Generally, subscribers with ROLMphone 400 digital station sets have a message
waiting button defined on their phone. If not, the phone system administrator can
add this feature. If the pilot number of the integration hunt group is assigned to
the message waiting button, messages are retrieved by pressing the button
whenever the light is flashing.
1
Enable forward-on-busy, forward on ring-no-answer, and forward on do-not-
disturb as desired for each subscriber. For example, for a subscriber assigned
to extension 201, at the command prompt, type
ENTER
press .
2
Before continuing, verify that the forwarding path is assigned correctly. For
example, at the command prompt, type
G
NTEGRATION UIDE
MOD EXTEN 201
then press
LI EXTEN 201
then
ENTER
.