Configuring Univerge Um8500 For The Integration - NEC UNIVERGE UM8500 Integration Manual

Configuring
UNIVERGE
UM8500 for the
integration
After ensuring that the UM8500 server is ready for the integration by completing
all appropriate tasks in the Installation Guide, perform the following procedure to
confirm that the integration is enabled.
To confirm that the integration is enabled
1 Start > All Programs > UNIVERGE UM8500 > Edit Switch
Click
2
If prompted for logon credentials, type the administrator extension and
OK
password, then click
On a new install the logon credentials are:
Extension = 99995
Password = 12345
3
Confirm that the settings match those in the following table.
Phone system settings
Parameter
Manufacturer
Model
Switch software version
Integration
4
If the settings are incorrect, select the correct settings and click
Voice Mail Now
.
.
Required setting
Lucent
Definity G3
All with digital 7434D emulation
Direct Digital
A
VAYA
.
Update
D82
5