NEC UNIVERGE UM8500 Integration Manual page 152

UNIVERGE UM8500 I
142
5
Use the programming system data table to program the ASYD settings. Each
bit is part of a hexadecimal number displayed in the ASYD settings. Convert
the hexadecimal number to binary to determine the individual settings. For
more information, refer to the NEAX 2400 Office Data Specification.
Programming system data
System Index
1 17
28
60
63
69
70
77
78
238
To program the Dterm phones that use Live Record
For each Dterm phone that uses the UNIVERGE UM8500 Live Record feature,
perform the following steps:
118
1
Assign an SFI of by using the ASFC command.
2
Assign the extension to the UCD pilot number of the voice messaging ports by
using the AVPS command.
3
Designate the following function key assignments by using the AKYD
command:
Function key number
66
67
68
69
G
NTEGRATION UIDE
Bit Value Description
b4 1 Blind transfer to attendant
console
b0–4 0 Guard timer not required
b3 0 UCD queuing required
b0 1 Blind transfer for stations in
service
b0 1 No recall, execute call forwarding
on no answer
b0 1 Called number display, when
forwarding to attendant console
b2 0 MWI refresh required
b0 1 Calling number display enabled
b1 1 Calling station status display
enabled
b0–7 0 Lamp flash rate
Function
Record
Re-record
Pause
End