Configuring Univerge Um8500 For The Integration - NEC UNIVERGE UM8500 Integration Manual

Configuring
UNIVERGE
UM8500 for the
integration
UNIVERGE UM8500 I
330
After ensuring that the UNIVERGE UM8500 server is ready for the integra-
tion by completing all appropriate tasks in the Installation Guide, perform
the following procedure to confirm that the integration is enabled.
To confirm that the integration is enabled
Start > All Programs > UNIVERGE UM8500 > Edit Switch
1
Click
2
If prompted for logon credentials, type the administrator extension and
OK
password, then click
On a new install the logon credentials are:
Extension = 99995
Password = 12345
3
Confirm that the settings match those in the following table.
Phone system settings
Parameter
Manufacturer
Model
Switch PBX software version
Integration
4
If the settings are incorrect, select the correct settings and click
Voice Mail Now
.
G
NTEGRATION UIDE
.
Required setting
Toshiba
DK 280
DK 424
CPU A, B, C/D
All
Serial
.
Update