Troubleshooting The Learn Tones Utility - NEC UNIVERGE UM8500 Integration Manual

14
Accept the default file name, and click
file are saved.
15 Done
Click to exit the Learn Tones utility.
Restart UM8500. For more information see
page 334.

Troubleshooting the Learn Tones utility

If the learn tones process fails, the phone system might not be generating a tone for a
sufficient length of time. To adjust the length of the tone that Learn Tones expects, in the
Learn Tones window change the number in the Frames column. For continuous tones, one
sample is one second; for tones with cadence, one sample is one cycle.
The process might also fail if the first few seconds of the tone varies from the rest of the
tone. To accommodate this situation, in the Learn Tones window change the number in the
Delay column.
If you need assistance resolving these or other problems, call Technical Support.
Open
. Changes to the phone system template
"To start the messaging system" on
341