Changing The Number Of Installed Ports - NEC UNIVERGE UM8500 Integration Manual

Dual-switch integration settings
Page
Subscribers >
Subscribers > Profile
Call Handlers >
Profile
Subscribers >
Subscriber Template
> MWI
Subscribers >
Subscribers > MWI
UNIVERGE UM8500 I
50
Field Description
Switch Select the phone system that the subscriber uses as a work
phone. If this setting is incorrect, UM8500 will not be able to:
Transfer calls to or from the subscriber.
●
Dial the subscriber's extension for Media Master recording by
●
phone.
On the System > Ports page, the selected phone system must
have an appropriate number of ports set to answer calls and to
dial out for MWIs and Media Master recording by phone.
Switch Select the phone system that the call handler uses. If this setting
is incorrect, UM8500 can not transfer calls to or from the call
handler.
Switch Select the phone system the subscriber's MWI extension belongs
to. If this setting is incorrect, UM8500 will not be able to turn
MWIs on or off. On the System > Ports page, the selected phone
system must have at least one port set to dial out for MWIs.
Switch Select the phone system the subscriber's MWI extension belongs
to. If this setting is incorrect, UM8500 will not be able to turn
MWIs on or off. On the System > Ports page, the selected phone
system must have at least one port set to dial out for MWIs.

Changing the number of installed ports

After the dual-switch integration is set up, follow these steps to add or remove
voice boards or uninstall voice board software, follow these steps:
Remove the Cisco TAPI service provider.
1
See "To remove the TAPI service
As appropriate, remove or add voice boards, or uninstall and
2
reinstall the voice board software.
See the System Management Help for information about removing Dialogic or
NMS voice board software.
Reinstall the TAPI service provider after setting up the voice
3
boards or reinstalling the voice board software.
See "To reinstall the TAPI service
Adjust the port assignments on the
4
If the traditional phone system is completely removed, the port assignments
for CallManager on the
voice boards and voice board software used in the integration with the
traditional phone system are removed.
To remove the TAPI service provider
1
On the messaging system server, log on to Windows as an administrator.
2
On the Windows taskbar, click
Phone and Modem Options
3
Double-click
Options dialog box appears.
Advanced
4
Click the
5
Depending on which TAPI service provider is installed, click either
Unity-CM TSP
or
Yes
6
Click to remove the selected telephony driver.
Close
7
Click to close the Phone and Modem Options dialog box.
To reinstall the TAPI service provider
1
On the messaging system server, log on to Windows as an administrator.
G
NTEGRATION UIDE
provider" below.
provider" on page 50.
System Ports
> page must be adjusted, after the
Start Control Panel
>
tab.
Cisco IP PBX Service Provider
> page.
System Ports
.
. The Phone and Modem
Cisco
Remove
, then click .