NEC UNIVERGE UM8500 Integration Manual page 51

Error message
The voice device named <device
name> does not respond to
registration requests. Ensure that
the device has been created in the
CallManager database and that the
device name prefix is correct.
Could not connect to the
CallManager. Verify that all Cisco
services are started on the
CallManager server.
Comments
Confirm that the values in
the procedure "
To configure the TAPI service provider
match the names of the uOne ports created, see "
to CallManager version 3.05
name prefix" of the names of the uOne ports, as necessary.
The IP address specified in
valid address, but CallManager services are not running on that
computer, possibly because CallManager is not installed on the server
with that IP address. Confirm that this address is correct and that the
CallManager services are running.
OK
10
Click to close the Cisco Unity-CM TSP dialog box. The following message
appears:
"This computer needs to be rebooted to update the wave driver."
OK
11
Click .
12 Close
Click to close the Phone and Modem Options dialog box.
13
Shut down and restart the messaging system server.
CallManager Device List
To add uOne ports
" on page 32. If not, change the "Device
Primary CallManager IP address
C C M
ISCO ALL ANAGER
, see step of
4
" on page 37 to
is a
41