Configuring Univerge Um8500 For The Integration - NEC UNIVERGE UM8500 Integration Manual

Configuring
UNIVERGE
UM8500 for the
integration
UNIVERGE UM8500 I
170
After ensuring that the voice mail server is ready for the integration by completing
all appropriate tasks in the Installation Guide, perform the following procedure to
confirm that the integration is enabled.
To select the INI file
1 Start > All Programs > UNIVERGE UM8500 > Edit Switch
Click
2
If prompted for logon credentials, type the administrator extension and
OK
password, then click
On a new install the logon credentials are:
Extension = 99995
Password = 12345
3
Confirm that the settings match those in the following tables.
NOTE
The settings below apply to all NEC NEAX 2400 phone systems.
Phone settings for OAI integrations with analog ports
Parameter
Manufacturer
Model
Specific version or
country
Integration method
Phone settings for OAI integrations with T1 ports
Parameter
Manufacturer
Model
Specific version or
country
Integration method
Phone settings for OAI integrations with digital ports
Parameter
Manufacturer
Model
Specific version or
country
Integration method
Phone settings for OAI integrations with IP ports
Parameter
Manufacturer
Model
Specific version or
country
Integration method
4
If the settings are incorrect, select the correct settings and click
Voice Mail Now
.
G
NTEGRATION UIDE
.
Required setting
NEC
NEAX2400 IMS
4203 and later analog boards and
OAI
OAI
Required setting
NEC
NEAX2400 IMS
4203 and later T1 boards and OAI
OAI
Required setting
NEC
NEAX2400 IMS
HDS R4 and later digital board with
OAI
OAI
Required setting
NEC
NEAX2400 IMS
Software release 16 or newer with IP
ports
OAI
.
Update