Installing And Starting The Oai Service; Testing The Oai Integration - NEC UNIVERGE UM8500 Integration Manual

Installing and
starting the
OAI service
After saving the configuration file, install the OAI service then test the service to
ensure a successful integration.
To install the OAI Service
1
On the OAIGear page, click the Install Service icon, or from the Service menu,
Install Service
click
2
On the AV OAI Voice Mail Integration Server - Install Service dialog box, select
This account
the option.
3
Enter the domain Administrator name, type and confirm the domain
Administrator password for the domain, then click
NOTE
It is recommended that the same domain administrator account
that was used to install the messaging system software is
entered. The Administrator name might need to be prefaced with
the domain. For example, <domain name>\Administrator.
You can also choose to install the OAI Service under a Local
System account, or even a different domain account, but this can
cause difficulties when troubleshooting any subsequent
integration problems.
4
From the Windows taskbar, click
Tools Services
> .
The Services MMC snap-in appears.
5
In the details pane, confirm that the AV OAI Integration Server service is
listed.
AV OAI Integration Server
6
Right-click
7
On the General tab, ensure that the Startup type is
8
Click the Recovery tab and then do the following:
Restart the Service
Ensure that
■
Restart service after
Enter 1 in the
■
OK
9
Click to exit the AV OAI Voice Mail Integration Server Properties dialog
box.
10
Start the OAI Integration server using either of the following methods:
Services MMC snap-in
In the
■
Server
, then click
AV OAI Server
Right-click the
■
Start service
.
The icon changes from stop to start.

Testing the OAI integration

After installing the service and setting up the parameters, test the integration to
ensure that it works correctly.
To test the OAI Integration Server
1
Place a direct call to the voice mail pilot number and confirm that is
answering. Use a voice mail subscriber extension with a valid phone
extension to place a call to the voice mail pilot number. You should hear:
"Please Enter Your Password."
2
Leave a voice message for a test user that has an actual phone extension.
Confirm that the message indicator for the extension is on. This verifies
■
that the MWI section of the configuration file was set properly.
NEC UNIVERGE SV8300
.
Start All Programs
>
, then click
is selected for each failure attempt.
field.
, right-click
Start
, or
in the notification area, and then click
USING
OK
.
Administrative
>
Properties
.
Automatic
.
AV OAI Integration
OAI
233